Better photovoltaics
Better designs
Finding or making new and better photovoltaic effect semiconductors
Better p and n junction
Experimenting with the p type and n type layer thicknessess
Better p - n junction
Thinner and clearer glass
Better antireflective coating
Update 1:
Better contacts
Update 2: (New)
-Sanded silicon
Tests with multiple sanding grids
-Nanoholes in photovoltaic effect having semiconductor
From Jeffrey Koelewijn on 01-01-2017
Update: Holed to porious to nanoholed and dippings in the right solution
From Jeffrey Koelewijn on 31 december 2016
Update:
Other, new or better doping solution(s)
A currently used method: Doping silicon with boron for the p junction
And doping silicon with phosphorus for the n junction
Update:
Graphene and photovoltaics
Very good conductive transpirant contacts for example
Update:
A gas or mixed gas and photovoltaics
Update:
Warning: Photovoltaics materials can be hazerdous
Update 06-04-2018
Finding more and improved ways of using metamaterials and nanotechnology.
zaterdag 31 december 2016
Giant sound scope for receiving space sounds
Giant sound scope for receiving space sounds
From Jeffrey Koelewijn on 31 december 2016
From Jeffrey Koelewijn on 31 december 2016
Self healing material that contracts with current for an exosuit
Self healing material that contracts with current for an exosuit
vrijdag 30 december 2016
Glowing liquid, electrolyte anode and cathode experiment
Glowing liquid, electrolyte anode and cathode experiment
Testing the difference between non glowing and glowing
Experiment 1:
Tonic water with quinine and added electrolyte if needed and UV light could be used. And then measurements with and without making the liquid glow.
Experiment 2
UV light after depletion and see if a measurement is made again.
And how good the measurement is.
From JK on 30 december 2016
Testing the difference between non glowing and glowing
Experiment 1:
Tonic water with quinine and added electrolyte if needed and UV light could be used. And then measurements with and without making the liquid glow.
Experiment 2
UV light after depletion and see if a measurement is made again.
And how good the measurement is.
From JK on 30 december 2016
Tungsten carbide edged knives, daggers, blades and swords
Tungsten carbide edged knives, daggers, blades and swords
With specialised smithing methods and techniques
From Jeffrey Koelewijn on 30 december 2016
With specialised smithing methods and techniques
From Jeffrey Koelewijn on 30 december 2016
dinsdag 27 december 2016
Experiment - Turning desert sand in to fine growing soil
Test and experiments for turning desert sand in to fine growing soil
From Jeffrey Koelewijn
From Jeffrey Koelewijn
UAV Unmanned aerial vehicle with multiple camera technologies
UAV Unmanned aerial vehicle with multiple camera technologies
Night scope, IR thermal imaging and through wall imaging.
And two or three lenses, one for medium far, one for far and one for extra far.
Night scope, IR thermal imaging and through wall imaging.
And two or three lenses, one for medium far, one for far and one for extra far.
Labels:
Air drones,
Army,
Camera,
Camera's,
Drone,
Drones,
Idea,
Ideas,
Information,
Inventions,
Military,
New,
Tech,
Technology,
Texts,
Unmanned aerial vehicle,
Writings
zondag 25 december 2016
Experiments with vibrating magnets and electricity generation
Experiments with vibrating magnets and electricity generation
Finding more and new food sources
Finding more and new food sources
Update:
For example
1: Higher yield per hectare
2:
Low water need
Or
Low sunlight need
Update:
For example
1: Higher yield per hectare
2:
Low water need
Or
Low sunlight need
Open sleeping bag
Very durable underside to sleep on with padding.
And filling inside the the part under which is slept.
And filling inside the the part under which is slept.
zaterdag 24 december 2016
Making light brown chocolate with 30 to 40 percent sugar
Making light brown chocolate with 30 to 40 percent sugar
And taste tests
And taste tests
Metaglass for photovoltaic cells and panels
Metaglass for photovoltaic cells and panels
From Jeffrey Koelewijn on 24 december 2016
From Jeffrey Koelewijn on 24 december 2016
vrijdag 23 december 2016
Metalens and sunlight focus experiments
Metalens and sunlight focus experiments
And test for example, if it focusses more sunlight and heat.
Environmental safe battery update - Electrolyte gel and or electrolyte paste
Environmental safe battery update - Electrolyte gel and or electrolyte paste
Electrolyte gel and or paste with the right recipe
Update: An environmental safe electrolyte
From Jeffrey Koelewijn on 23 december 2016
Electrolyte gel and or paste with the right recipe
Update: An environmental safe electrolyte
From Jeffrey Koelewijn on 23 december 2016
God wind (Kami kaze) Exploding unmanned aerial vehicles (UAV),
Unmanned aerial drones which explode on hard impact (with safety) or with the push of a button
From JK on 23 december 2016
From JK on 23 december 2016
Labels:
Army,
Bomb,
Bombs,
Drone,
Drones,
Explosive,
Explosives,
Idea,
Ideas,
Military,
Military technology,
New,
Tech,
Technology,
Unmanned aerial vehicle,
Unmanned aerial vehicles
donderdag 22 december 2016
Big tungsten carbide point chisel
Big tungsten carbide point chisel
And performance tests
It might be a too valuable a metal for commercial production
And performance tests
It might be a too valuable a metal for commercial production
Big black thermo electric panels
Big black thermo electric panels
For converting heat to electricity
2 designs:
A square and flat design
Or a panel consisting out of rows of thermo electric pipes
From JK
For converting heat to electricity
2 designs:
A square and flat design
Or a panel consisting out of rows of thermo electric pipes
From JK
woensdag 21 december 2016
A cannon for space exploration
A cannon for space exploration
For shooting shielded and armored chips and or compact unfoldable rovers and aerial drones to other planets and or other solar systems.
From Jeffrey Koelewijn
For shooting shielded and armored chips and or compact unfoldable rovers and aerial drones to other planets and or other solar systems.
From Jeffrey Koelewijn
dinsdag 20 december 2016
I live in Holland and this continent needs another name
I live in Holland and this continent needs another name.
Experiment Shooting in space conditions
Experiment Shooting in space conditions.
Firing 9 mm rounds and assault rifle rounds.
Safety is important. Examples of safety measures; Roped or mechanical trigger pull and bulletproof glass.
From Jeffrey Koelewijn on 20 december 2016
Firing 9 mm rounds and assault rifle rounds.
Safety is important. Examples of safety measures; Roped or mechanical trigger pull and bulletproof glass.
From Jeffrey Koelewijn on 20 december 2016
Water finder
Water finder
A device for finding water
The device works by recognising the scent of water
Design:
A handheld version with a screen and a marker on it pointing to the direction of where the water is
Extra:
An aerial device version for finding the water with GPS
From Jeffrey Koelewijn on 20 december 2016
A device for finding water
The device works by recognising the scent of water
Design:
A handheld version with a screen and a marker on it pointing to the direction of where the water is
Extra:
An aerial device version for finding the water with GPS
From Jeffrey Koelewijn on 20 december 2016
maandag 19 december 2016
Jet unmanned combat aerial vehicle (UCAV),
A jet powered aerial drone
From Jeffrey Koelewijn on 19 december 2016
From Jeffrey Koelewijn on 19 december 2016
zondag 18 december 2016
The most heat resistant photovoltaics and an optical lens to focus the sunlight
Compact very heat resistant photovoltaic cells and a lens to focus concentrated sunlight on to the compact photovoltaic cell
From Jeffrey Koelewijn
From Jeffrey Koelewijn
Diamond optical glasses for a microscope
Using diamond glasses for a microscope
For the ocular and objectives
And see if it gives a better and clearer view
For the ocular and objectives
And see if it gives a better and clearer view
Mirroring sunlight to an upward bend solar panel
Mirroring sunlight to an upward bend solar panel
Maybe with 2 special mirrors attached to the solar panel
It should move along with the sun to receive maximum sunlight each day.
Maybe with 2 special mirrors attached to the solar panel
It should move along with the sun to receive maximum sunlight each day.
vrijdag 16 december 2016
Update - I'm going to work on my English
Update - I'm going to work on my English
My English isn't good enough here and there, so I'm going to solve that.
16 december 2016
My English isn't good enough here and there, so I'm going to solve that.
16 december 2016
donderdag 15 december 2016
One person tent update
Information from previous publish:
Wind and waterproof, strong, durable, comfortable and easy to set up
Update
With a strong and durable synthetic fiber bag
Partly waterproof
From Jeffrey Koelewijn
Better thermal clothing update - Filling ideas
1
Synthetic fur filling
With extra fur near the inside, including it being more wool like
And a thin layer of fur on the inside
Update:
Laminated synthetic fur
2
Layered filling
From Jeffrey Koelewijn on 15 december 2016
Synthetic fur filling
With extra fur near the inside, including it being more wool like
And a thin layer of fur on the inside
Update:
Laminated synthetic fur
2
Layered filling
From Jeffrey Koelewijn on 15 december 2016
Extra strong and durable backpack design
Extra strong and durable backpacks
Strong and durable.
Very strong and durable material for the backpack
Rigid and very strong underside
Very strong and durable shoulder straps and handle
Some padding for the back
The best and strongest stitching and stitching material
The best zips, strong and durable
Enough space.
Around three big parts with strong partings,
two front parts, one high and one low
and two side parts
Important:
Very strong, durable, enough space and comfortable
Optional:
A waterproof part can be very desired maybe the lower or upper front part
Or a waterproof bag
For electronics or paper and more
A waterproof flap for over the three big parts
From Jeffrey Koelewijn on 15 december 2016
Strong and durable.
Very strong and durable material for the backpack
Rigid and very strong underside
Very strong and durable shoulder straps and handle
Some padding for the back
The best and strongest stitching and stitching material
The best zips, strong and durable
Enough space.
Around three big parts with strong partings,
two front parts, one high and one low
and two side parts
Important:
Very strong, durable, enough space and comfortable
Optional:
A waterproof part can be very desired maybe the lower or upper front part
Or a waterproof bag
For electronics or paper and more
A waterproof flap for over the three big parts
From Jeffrey Koelewijn on 15 december 2016
Better thermo clothing
Better thermo clothing
From downblouse to sweaters and
And from socks to pants
Jackets:
Extra warm.
Testing all kinds of fillings.
Insulation tests.
Wind and waterproof, strong, comfortable and durable.
The best materials
And the right designs
Extra: Filling the hood with fillings.
A good scarf.
Good pockets.
And big pockets on the inside.
From Jeffrey Koelewijn
From downblouse to sweaters and
And from socks to pants
Jackets:
Extra warm.
Testing all kinds of fillings.
Insulation tests.
Wind and waterproof, strong, comfortable and durable.
The best materials
And the right designs
Extra: Filling the hood with fillings.
A good scarf.
Good pockets.
And big pockets on the inside.
From Jeffrey Koelewijn
Stainless steel sledgehammer
Stainless steel sledgehammer
With the best and most effective type of stainless steel
Extra:
A two handed and a one handed version
And tests on durability and performance
From Jeffrey Koelewijn
With the best and most effective type of stainless steel
Extra:
A two handed and a one handed version
And tests on durability and performance
From Jeffrey Koelewijn
Mirroring methods for getting more sunlight on solar panels
Mirroring methods for getting more sunlight on solar panels using mirrors or reflective material.
With the designs moving along, to the most amount of sunlight receiving angles.
Update:
A photovoltaic panel fully surrounded by reflective material or mirrors
With the designs moving along, to the most amount of sunlight receiving angles.
Update:
A photovoltaic panel fully surrounded by reflective material or mirrors
Chromium sledgehammer
A chromium sledgehammer
And tests on how well it performs as well as the durability and what happens when put under to much pressure.
By Jeffrey Koelewijn on 15 december 2016
And tests on how well it performs as well as the durability and what happens when put under to much pressure.
By Jeffrey Koelewijn on 15 december 2016
woensdag 14 december 2016
Better dynamos update - Testing the difference in voltage between a solid wire and multiple wired wire
Testing the difference in voltage between a solid wire and multiple wired wire
For example a wire consisting of 6 to 12 wires.
Same overal thickness, same length and weight, same windings
Same turning speed of the magnet.
From Jeffrey Koelewijn on 14 december 2016
For example a wire consisting of 6 to 12 wires.
Same overal thickness, same length and weight, same windings
Same turning speed of the magnet.
From Jeffrey Koelewijn on 14 december 2016
Better dynamos update - Measuring the difference in voltage of normal copper wire and red copper wire in a dynamo
Measuring the difference in voltage between normal copper wire and red copper wire in a dynamo
Same wire thickness, same windings, the same coil
and the same turning speed of the magnet
From Jeffrey Koelewijn
Same wire thickness, same windings, the same coil
and the same turning speed of the magnet
From Jeffrey Koelewijn
Chromium armour piercing bullets
Chromium armour piercing bullets
From Jeffrey Koelewijn on 14 december 2016
From Jeffrey Koelewijn on 14 december 2016
Ceramic sledgehammers
Ceramic sledgehammers
And tests how well they perform , the durability and what happens when put under to much tension and more
From Jeffrey Koelewijn
And tests how well they perform , the durability and what happens when put under to much tension and more
From Jeffrey Koelewijn
Making and testing a boron carbide sledgehammer
Making and testing a boron carbide sledgehammer
And testing the durability, the effectiveness and what happens when put under too much stress.
Problem: It might explode under too much pressure because of the hardness and brittleness. And that would be dangerous.
From Jeffrey Koelewijn
And testing the durability, the effectiveness and what happens when put under too much stress.
Problem: It might explode under too much pressure because of the hardness and brittleness. And that would be dangerous.
From Jeffrey Koelewijn
A tungsten carbide sledgehammer
A tungsten carbide sledgehammer.
A big one
and a one handed one.
And tests how well it performs as wel as the durability and what happens when put under to much pressure.
Too expensive and a too expensive and too valuable a metal for commercial production.
A big one
and a one handed one.
And tests how well it performs as wel as the durability and what happens when put under to much pressure.
Too expensive and a too expensive and too valuable a metal for commercial production.
A ceramic blade or sword
A ceramic blade or sword
Making the blade by sintering
And testing the effectiveness, hardness sharpness.
And splintering and breaking points.
Bashings of a steel blade and a ceramic blade against each other.
From Jeffrey Koelewijn
Making the blade by sintering
And testing the effectiveness, hardness sharpness.
And splintering and breaking points.
Bashings of a steel blade and a ceramic blade against each other.
From Jeffrey Koelewijn
Multiple, powder or dust seeds artificial gem growing method
Multiple, powder or dust seeds artificial gem growing method.
Has not been tested yet.
Method idea by Jeffrey Koelewijn on december 2016
Has not been tested yet.
Method idea by Jeffrey Koelewijn on december 2016
Gem dust
Gem dust
Techniques
Simply grinding it constantly
Laser cutting or sawing it in to pieces
Pressing it to pieces
Bashing it constantly
Heating it to a critical point and bashing it
Heating it to a critical point and suddenly cooling it
Dusts from for example:
Diamond
Lonsdaleite
Wurtzite boron nitride
Aggretated diamond nanorods
Important:
Finding uses
Maybe adding it yo something like a metal
For use as seeds
From Jeffrey Koelewijn on 14 december 2016
Techniques
Simply grinding it constantly
Laser cutting or sawing it in to pieces
Pressing it to pieces
Bashing it constantly
Heating it to a critical point and bashing it
Heating it to a critical point and suddenly cooling it
Dusts from for example:
Diamond
Lonsdaleite
Wurtzite boron nitride
Aggretated diamond nanorods
Important:
Finding uses
Maybe adding it yo something like a metal
For use as seeds
From Jeffrey Koelewijn on 14 december 2016
Projects for clamatising certain food producing trees and vegitation
Projects for clamatising certain food producing trees and vegitation
By Jeffrey Koelewijn on 14 december 2016
By Jeffrey Koelewijn on 14 december 2016
Growing food underground
Growing food underground.
With good lighting and sprinkler systems.
A plus point:
Minimal above ground space needed.
Possibly very good insulation and low heating costs.
Extra:
Growing mushrooms which need minimal to almost no light in racks.
And growing winter foods.
A design:
Growing underground and packaging, distribution and optional store above ground.
By Jeffrey Koelewijn on 14 december 2016
With good lighting and sprinkler systems.
A plus point:
Minimal above ground space needed.
Possibly very good insulation and low heating costs.
Extra:
Growing mushrooms which need minimal to almost no light in racks.
And growing winter foods.
A design:
Growing underground and packaging, distribution and optional store above ground.
By Jeffrey Koelewijn on 14 december 2016
A project for growing wurtzite boron nitride artificially
A project for growing wurtzite boron nitride artificially
From Jeffrey Koelewijn on 14 december 2016
From Jeffrey Koelewijn on 14 december 2016
Reflective parabolic dish and the most heat resistant photovoltaic cell
Reflective parabolic dish and the most heat resistant photovoltaic cell.
Design:
The most heat resistant photovoltaic effect presenting semi conductor
And the most heat resistant cell, small panel build up.
And measurements of the effectiveness.
By Jeffrey Koelewijn on 14 december 2016
Design:
The most heat resistant photovoltaic effect presenting semi conductor
And the most heat resistant cell, small panel build up.
And measurements of the effectiveness.
By Jeffrey Koelewijn on 14 december 2016
dinsdag 13 december 2016
Creating the most black, most sunlight absorbing photovoltaics
Creating the most black, most sunlight absorbing photovoltaics
And seeing, testing the effectiveness
By Jeffrey Koelewijn on 13 december 2016
And seeing, testing the effectiveness
By Jeffrey Koelewijn on 13 december 2016
Labels:
Energy,
Energy production,
Idea,
Ideas,
Inventions,
Inventions and ideas,
Jef,
Jef Koelewijn,
Jeffrey Koelewijn,
JK,
Photovoltaic,
Photovoltaics,
Solar cell,
Solar cells,
Solar energy
Making new brown photovoltaics and improving them
Making new brown photovoltaics and improving them.
Red with yellow photovoltaics
Red with yellow photovoltaics
Kind of like, with around the colour and colour patterns of the sun
Creating and testing the effectiveness
Design by Jeffrey Koelewijn on 13 december 2016
Testing the effectiveness of red and dark red photovoltaics and improving them
Testing the effectiveness of red and dark red photovoltaics and improving them.
I searched for them and they do already exist.
By Jeffrey Koelewijn
I searched for them and they do already exist.
By Jeffrey Koelewijn
Update - I hope I can try some of the experiments I designed soon and publish the results
Update - I hope I can try some of the experiments I designed soon and publish the results
Jeffrey Koelewijn
13 december 2016
Jeffrey Koelewijn
13 december 2016
Experiments and designs for the most optimal voltaic piles
Experiments and designs for the most optimal voltaic piles.
Sizes: lengths and widths and hights and amounts of electrolyte and amount of elecrtricity generated.
Round voltaic piles.
And tests on squared voltaic piles and differences.
Tests with differerent metals and materials.
By Jeffrey Koelewijn
Sizes: lengths and widths and hights and amounts of electrolyte and amount of elecrtricity generated.
Round voltaic piles.
And tests on squared voltaic piles and differences.
Tests with differerent metals and materials.
By Jeffrey Koelewijn
Sea water electrolyte power plant 2
Sea water electrolyte power plant 2
With big to very big voltaic piles.
Some filtering of the sea water before contact with the voltaic piles might be better.
Jeffrey Koelewijn
With big to very big voltaic piles.
Some filtering of the sea water before contact with the voltaic piles might be better.
Jeffrey Koelewijn
Shapes and sizes of cathodes and anodes and amount of electricity generated with electrolytes
Shapes and sizes of cathodes and anodes and amount of electricity generated with electrolytes.
Sizes and amounts of electrolyte and the amount of generated current.
Forms
Plates, poles, tubes, squares and more. And measurements how much current they generate with an electrolyte.
By JK
Sizes and amounts of electrolyte and the amount of generated current.
Forms
Plates, poles, tubes, squares and more. And measurements how much current they generate with an electrolyte.
By JK
Experiment with holed anodes and cathodes and electrolytes
Experiment with holed anodes and cathodes and electrolytes
Experiment to see if this will generate more electricity
Extra: Two tubes with measured holes in it
By JK
Experiment to see if this will generate more electricity
Extra: Two tubes with measured holes in it
By JK
maandag 12 december 2016
Test, experiment Can a photovoltaic cell load on a glowing liquid in a completely dark room
Test, experiment
Can a photovoltaic cell load on a glowing liquid in a completely dark room
And if this works what are the measurements
By JK
Can a photovoltaic cell load on a glowing liquid in a completely dark room
And if this works what are the measurements
By JK
Combining thermal electric, heat to energy and photovoltaics
Combining thermal electric, heat to energy and photovoltaics
Idea from Jeffrey Koelewijn
12 december 2016
Idea from Jeffrey Koelewijn
12 december 2016
Improvised body armour ideas
Improvised body armour
Taking out the original filling and putting in kevlar.
Sewing and making a bulletproof vest with strong durable non elastic textile and kevlar filling.
Plate:
Two or three steel plates and fiberglass cloth or kevlar in between.
And a strong non elastic strong synthetic fiber casing.
Taking out the original filling and putting in kevlar.
Sewing and making a bulletproof vest with strong durable non elastic textile and kevlar filling.
Plate:
Two or three steel plates and fiberglass cloth or kevlar in between.
And a strong non elastic strong synthetic fiber casing.
2 handgun penetrator bullet designs
Slightly to good sharpened penetrator bullets.
With a slightly to good sharpened plus like shape point.
Multiple sharpening designs.
And offcourse testing the results.
Notice: should be made professionally by some one with experience.
A three sided penetrator instead of a plus like shape
And tests to see how well this bullet does.
With a slightly to good sharpened plus like shape point.
Multiple sharpening designs.
And offcourse testing the results.
Notice: should be made professionally by some one with experience.
A three sided penetrator instead of a plus like shape
And tests to see how well this bullet does.
Labels:
Ammo,
Ammunition,
Army,
Bullet,
Bullet design,
Bullets,
Idea,
Ideas,
Inventions,
Jef,
Jef Koelewijn,
Jeffrey Koelewijn,
JK,
Military,
Military technology,
Penetrator,
Penetrator bullets,
Penetrators,
weapon,
Weapons
Experiment - pouring molten to boiling carbon in to liquid nitrogen
Experiment - pouring molten to boiling carbon in to liquid nitrogen
Should be done safely and in the right kind of lab
Should be done safely and in the right kind of lab
zondag 11 december 2016
Tests and experiments with many photovoltaics and different wavelengths of the spectrum of light
Tests and experiments with many photovoltaics and different wavelengths of the spectrum of light
Method 1
Using adjustable or different coloured lights in a completely dark room
And nowing the voltages due to the colour or more exact the wavelengths
Method 2
Using filters or gells for over the photovoltaic cells or for completely surrounding the photovoltaic cell
Using method 1 and 2 on many photovoltaics.
With as exact and accurate results as possible.
For example; it is important that if using different lights, that the power is the same.
Or for example that the gells have the same thickness. And the amount of sunlight is the same
Also has importance for creating better tandem photovoltaics. (Tandem - two)
Because there are differences in amounts of absorbtions of the wavelengths of light and sensitivities.
Update:
For better multi junction solar cells
By Jeffrey Koelewijn on 11 december 2016
Method 1
Using adjustable or different coloured lights in a completely dark room
And nowing the voltages due to the colour or more exact the wavelengths
Method 2
Using filters or gells for over the photovoltaic cells or for completely surrounding the photovoltaic cell
Using method 1 and 2 on many photovoltaics.
With as exact and accurate results as possible.
For example; it is important that if using different lights, that the power is the same.
Or for example that the gells have the same thickness. And the amount of sunlight is the same
Also has importance for creating better tandem photovoltaics. (Tandem - two)
Because there are differences in amounts of absorbtions of the wavelengths of light and sensitivities.
Update:
For better multi junction solar cells
By Jeffrey Koelewijn on 11 december 2016
More tests and experiments with the antiferromagnetic properties of chromium
More tests and experiments with the antiferromagnetic properties of chromium.
Lists of all known matter
Lists of all known matter.
Next to the periodic table.
With sorted lists.
Like with all known metalic alloys, all known fluids, all known gasses and more.
And lists with all known matter containing for example hydrogen, helium, lithium, beryllium, boron, carbon, nitrogen and so on.
Next to the periodic table.
With sorted lists.
Like with all known metalic alloys, all known fluids, all known gasses and more.
And lists with all known matter containing for example hydrogen, helium, lithium, beryllium, boron, carbon, nitrogen and so on.
zaterdag 10 december 2016
Tests to see if a strong to military laser can burn through highly reflective material and how fast
Tests to see if a strong to military laser can burn through highly reflective material and how fast.
Tests with multiple laser powers and multiple thicknesses of the highly reflective material.
By Jeffrey Koelewijn in december 2016
Tests with multiple laser powers and multiple thicknesses of the highly reflective material.
Tests should be done safely and in the right kind of lab.
By Jeffrey Koelewijn in december 2016
Tests to see how fast a military laser burns through some of the elements of the periodic table and more with the highest melting points
Tests to see how fast a military laser burns through some of the elements of the periodic table and more with the highest melting points.
Tests on carbon and tunsten.
And more, on boron carbide.
And on metal foams.
Tests should be done safely and in the right kind of lab.
Tests on carbon and tunsten.
And more, on boron carbide.
And on metal foams.
Tests should be done safely and in the right kind of lab.
Laser shielding technology
Laser shielding technology.
Shieldin near military to military laser.
Plates and panels.
High temp resistance
Carbon
Melting point of around 3550 degrees celcius
Boron carbide (Up to level IV body armour against bullets)
Melting point of around 2763 degrees celcius
Metal foam
Reflective material
For military vehicles and body armour
For shielding rockets
By Jeffrey K.
In december 2016
Shieldin near military to military laser.
Plates and panels.
High temp resistance
Carbon
Melting point of around 3550 degrees celcius
Boron carbide (Up to level IV body armour against bullets)
Melting point of around 2763 degrees celcius
Metal foam
Reflective material
For military vehicles and body armour
For shielding rockets
By Jeffrey K.
In december 2016
Better balistic plates for tanks
If the costs are right boron carbide balistic plates at the right spots or on almost the whole tank.
Creating level V body armour
Creating level V body armour.
____________________________________
Update:
A material harder then boron carbide.
Update:
Maybe cubic boron nitride
If it can be turned into plates for the right price
____________________________________
Update:
A material harder then boron carbide.
Update:
Maybe cubic boron nitride
If it can be turned into plates for the right price
Wind tunnel tests on anti tank rifle ammunition
Wind tunnel tests on anti tank rifle ammunition.
And new designs.
And new designs.
Wind tunnel tests on assault rifle and machine gun bullets
Wind tunnel tests on assault rifle and machine gun bullets.
And new designs.
And new designs.
Small to very small disguised air drones
Small to very small disguised air drones.
Design:
A very good and powerfull small long lasting battery
With self reloading through photovoltaic cells
Rotors or wings flight system
Equiped with a camera.
A very small, light and good camera system
And optional sound recording.
Disguised
For example as a beetle
Or camouflaged
By JK
Design:
A very good and powerfull small long lasting battery
With self reloading through photovoltaic cells
Rotors or wings flight system
Equiped with a camera.
A very small, light and good camera system
And optional sound recording.
Disguised
For example as a beetle
Or camouflaged
By JK
Three experiments with an electrolyte and an anode and a cathode
Three experiments with an electrolyte and an anode and a cathode
1
Differences in voltage when adding an electorolyte to cold water and measuring voltage and adding an electrolyte to boiling water and letting it cool and testing the voltage.
Going allong a list of electrolytes.
Important:
2
See if there is a difference in voltage with hot, near boiling to boiling water and an electrolyte and cold water an electrolyte.
Important:
With cold water it is important that the electrolyte is mixed wel with the water.
Adding it to boiling water and letting it cool might be needed
3
Seeing if there is a difference in voltage between stil water with an electrolyte and constantly moving water with an electrolyte.
Important:
The same amount of water and the same amount of elrctrolyte.
The same sized anodes and cathodes.
1
Differences in voltage when adding an electorolyte to cold water and measuring voltage and adding an electrolyte to boiling water and letting it cool and testing the voltage.
Going allong a list of electrolytes.
Important:
The same amount of water and the same amount of elrctrolyte.
The same sized anodes and cathodes.
2
See if there is a difference in voltage with hot, near boiling to boiling water and an electrolyte and cold water an electrolyte.
Important:
The same amount of water and the same amount of elrctrolyte.
The same sized anodes and cathodes.
Extra:With cold water it is important that the electrolyte is mixed wel with the water.
Adding it to boiling water and letting it cool might be needed
3
Seeing if there is a difference in voltage between stil water with an electrolyte and constantly moving water with an electrolyte.
Important:
The same amount of water and the same amount of elrctrolyte.
The same sized anodes and cathodes.
vrijdag 9 december 2016
Bulletproof technology - steel, titanium and polycarbonate layered plate
A bulletproof plate made with steel, titanium and layers of polycarbonate.
And a coating as finish.
Only one layer of titanium due to the cost.
The titanium is lighter, strong and also has certain properties.
The plate should be strong and rigid and durable and resistant to rough handling.
Bulletproof effectiveness tests.
By Jeffrey Koelewijn
Very slightly to slightly, weak radioactive metal anode and or cathode and an electrolyte
Very slightly to slightly, weak radioactive metal anode and or cathode and an electrolyte.
Should be done safely and in the right kind of lab.
By JK
Should be done safely and in the right kind of lab.
By JK
Tests and experiments with diamond and different kinds of radiation and differences
Tests and experiments with diamond and different kinds of radiation and differences.
Tests and experiments should be done safely and in the right kind of lab.
Tests and experiments to see how much artificial diamond produces energy when exposed to radiation compared to normal diamond
Tests and experiments to see how much artificial diamond produces energy when exposed to radiation compared to normal diamond.
Tests and experiments should be done safely and in the right kind of lab.
Diamond and weak to slightly radioactive solid waste pile
Diamond and weak to slightly radioactive solid waste pile.
A round pile with layers of round diamonds and round weak to slightly radioactive solid waste.
A coating or shielding material around the pile.
Making: Tests and experiments should be done safely and in the right kind of lab.
Update:
Using artificial diamond.
By JK in december 2016
zaterdag 3 december 2016
Diamond and weak to slightly radioactive metal pile
Diamond and weak to slightly radioactive metal pile
A round pile with layers of round diamonds and round weak to slightly radioactive metal.
Update:
A coating or shielding material around the pile.
If AM 241 (Americium 241)(present in smoke detectors) would work it would be a great find.
Update:
Using artificial diamond.
Update:
Sideways squared pile.
By Jeffrey Koelewijn
A round pile with layers of round diamonds and round weak to slightly radioactive metal.
Update:
A coating or shielding material around the pile.
Making: Tests and experiments should be done safely and in the right kind of lab.
If AM 241 (Americium 241)(present in smoke detectors) would work it would be a great find.
Update:
Using artificial diamond.
Update:
Sideways squared pile.
By Jeffrey Koelewijn
Tests and experiments to see if shape and size can effect the amount of current being produced with gems that generate electricity when being exposed to radiation
Tests and experiments to see if shape and size can effect the amount of current being produced with gems that generate electricity when being exposed to radiation.
Seeing if shape effects the amount of current being produced.
Seeing if size effects the amount of current being produced.
These tests and experiments should be done safely and in the right kind of lab.
By Jeffrey Koelewijn in december 2016
Seeing if shape effects the amount of current being produced.
Seeing if size effects the amount of current being produced.
These tests and experiments should be done safely and in the right kind of lab.
By Jeffrey Koelewijn in december 2016
Tests which gems can produce electricity when exposed to radiation
Tests which gems can produce electricity when exposed to radiation.
Should be done safely and in the right kind of lab.
By Jeffrey Koelewijn
Should be done safely and in the right kind of lab.
By Jeffrey Koelewijn
Magnets in waterproof hard plastic casings
Magnets in waterproof hard plastic casings
Casings that float and casings that sink.
With neodynium magets.
And with ferrite magnets.
The casing should be made of a good material.
And be hard and durable.
By Jeffrey Koelewijn
Casings that float and casings that sink.
With neodynium magets.
And with ferrite magnets.
The casing should be made of a good material.
And be hard and durable.
By Jeffrey Koelewijn
donderdag 1 december 2016
Sea water electrolyte power plant
Sea water electrolyte power plant
First: Tests to see if a bigger container with salt and water and bigger plates, pipes, plates or poles of for example copper and zinc do generate more current.
Tests to see what the best metals are to use.
Extra: The sea water also constantly moves, this might have a possitive effect.
By Jeffrey Koelewijn on 1 december 2016
First: Tests to see if a bigger container with salt and water and bigger plates, pipes, plates or poles of for example copper and zinc do generate more current.
Tests to see what the best metals are to use.
Extra: The sea water also constantly moves, this might have a possitive effect.
By Jeffrey Koelewijn on 1 december 2016
Material that contracts with current for a special type of exosuit or power armour
Material that contracts with current for a special type of exosuit or power armour
By JK in 2016
By JK in 2016
woensdag 30 november 2016
Better anti tank rifles
Better anti tank rifles
Goals: Shoot further, more power and velocity and more accuracy.
Weapon system
1 The sniper or anti tank rifle design
Everything that can be improved to improve velocity and distance.
And still keep it safe
1 Recoil control
Technology
Technique
The cartridge and the bullet.
1 The calibre
2 The propellant
3 The bullet design
For example more arodynamic like current boat tail and rippled bullets.
And a better scope, sight
Sketch by JK in 2016
Goals: Shoot further, more power and velocity and more accuracy.
Weapon system
1 The sniper or anti tank rifle design
Everything that can be improved to improve velocity and distance.
And still keep it safe
1 Recoil control
Technology
Technique
The cartridge and the bullet.
1 The calibre
2 The propellant
3 The bullet design
For example more arodynamic like current boat tail and rippled bullets.
And a better scope, sight
Sketch by JK in 2016
I wrote all of these documents on my tablet
I wrote all of these documents on my tablet.
I will try and improve everything when I have a PC or laptop again.
I will try and improve everything when I have a PC or laptop again.
A giant optical glass lens that focusses sunlight onto a pillar to turn water into steam
A giant optical glass lens that focusses sunlight onto a pillar to turn water into steam
Design:
A giant optical lens to focus sunlight into a single spot.
A pillar on which the sunlight is focussed.
A black pillar might work best.
A bassin with water.
The pillar is partly inside this bassin.
A turbine driven by steam.
Part 2:
The pillar should be highly resistant against the high temperatures and should be an excelent conductor of heat.
The best type of lens with the right measurements.
The giant optical glass lens should rotate with the sun and focussing should go automatic.
Safety:
Safety is very important, because of the very high temperatures.
Design 2:
A row of multiple big optical glass lenses and multiple pillars to catch the focussed sunlight.
From Jeffrey Koelewijn
30 november 2016
Design:
A giant optical lens to focus sunlight into a single spot.
A pillar on which the sunlight is focussed.
A black pillar might work best.
A bassin with water.
The pillar is partly inside this bassin.
A turbine driven by steam.
Part 2:
The pillar should be highly resistant against the high temperatures and should be an excelent conductor of heat.
The best type of lens with the right measurements.
The giant optical glass lens should rotate with the sun and focussing should go automatic.
Safety:
Safety is very important, because of the very high temperatures.
Design 2:
A row of multiple big optical glass lenses and multiple pillars to catch the focussed sunlight.
From Jeffrey Koelewijn
30 november 2016
Better thermal heat, sunlight reflection typed power generation
Better thermal heat, sunlight reflection typed power generation
The best reflective material
The best sizes and geometrical shape for the reflectors
A better pillar, with better heat conduction and with more ability to absorb heat
A black pillar might work
A better steam turbine and overall design
With the reflectors rotating to the most optimal position to reflect the most sunlight.
By Jeffrey Koelewijn in november 2016
The best reflective material
The best sizes and geometrical shape for the reflectors
A better pillar, with better heat conduction and with more ability to absorb heat
A black pillar might work
A better steam turbine and overall design
With the reflectors rotating to the most optimal position to reflect the most sunlight.
By Jeffrey Koelewijn in november 2016
maandag 28 november 2016
Experiments for growing artificial lonsdaleite
Experiments for growing artificial lonsdaleite.
And tests for discovering potence for use in electronics.
By Jeffrey Koelewijn in november 2016
And tests for discovering potence for use in electronics.
By Jeffrey Koelewijn in november 2016
Better sniper rifles
Better sniper rifles.
Goals: Shoot further, more power and velocity and more accuracy.
Weapon system
1 The sniper or anti tank rifle design
Everything that can be improved to improve velocity and distance.
And still keep it safe
1 Recoil control
Technology
Technique
The cartridge and the bullet.
1 The calibre
2 The propellant
3 The bullet design
For example more arodynamic like current boat tail and rippled bullets.
And a better scope, sight
Sketch by JK in 2016
Goals: Shoot further, more power and velocity and more accuracy.
Weapon system
1 The sniper or anti tank rifle design
Everything that can be improved to improve velocity and distance.
And still keep it safe
1 Recoil control
Technology
Technique
The cartridge and the bullet.
1 The calibre
2 The propellant
3 The bullet design
For example more arodynamic like current boat tail and rippled bullets.
And a better scope, sight
Sketch by JK in 2016
Cubic boron nitride and carbon nitride, boron carbon nitride and metal borides armour piercing bullets
Cubic boron nitride armour piercing bullets.
A full cubic boron nitride penetrator
Maybe a design where it is fitted on a sabot.
Or on a normal type of penetrator.
With the pointed gem fitted on the penetrator.
Partly inside the end of the penetrator.
With 3 parts fitted near or against the point of the penetrator.
Inside grooves so the penetrator is smooth.
Carbon nitride armour piercing bullets.
Boron carbon nitride armour piercing bullets.
And metal borides armour piercing bullets.
If possible a sabot design. Or normal penetrator.
With the right designs.
And through testing.
By Jeffrey Koelewijn november 2016
A full cubic boron nitride penetrator
Maybe a design where it is fitted on a sabot.
Or on a normal type of penetrator.
With the pointed gem fitted on the penetrator.
Partly inside the end of the penetrator.
With 3 parts fitted near or against the point of the penetrator.
Inside grooves so the penetrator is smooth.
Carbon nitride armour piercing bullets.
Boron carbon nitride armour piercing bullets.
And metal borides armour piercing bullets.
If possible a sabot design. Or normal penetrator.
With the right designs.
And through testing.
By Jeffrey Koelewijn november 2016
Wurtzite boron nitride armour piercing bullets
Wurtzite boron nitride armour piercing bullets.
Full wurtzite boron nitride penetrator
Or maybe fitted on a hard steel or tungsten carbide penetrator.
Without any outsticking wurtzite boron nitride, the penetrator should be smooth.
By JK in 2016
Full wurtzite boron nitride penetrator
Or maybe fitted on a hard steel or tungsten carbide penetrator.
Without any outsticking wurtzite boron nitride, the penetrator should be smooth.
By JK in 2016
Artificial gem penetrator armour piercing bullet
Artificial gem penetrator armour piercing bullet.
The artificial gem should at least score 9 on the mohs scale of hardness.
Design: 1
A copper jacket, lead seal, mild steel cup, the artificial gem penetrator and more.
2
Paint an external coating a steel jacket a lead alloy and then the artificially gem penetrator.
To find out:
How good they work.
How good they work compared to tungsten carbide.
Also extra: The weight difference compared to tungsten carbide with the same measurements.
What the cost is and if its worth it.
Update:
Problem; they might shatter
By JK in 2016
The artificial gem should at least score 9 on the mohs scale of hardness.
Design: 1
A copper jacket, lead seal, mild steel cup, the artificial gem penetrator and more.
2
Paint an external coating a steel jacket a lead alloy and then the artificially gem penetrator.
To find out:
How good they work.
How good they work compared to tungsten carbide.
Also extra: The weight difference compared to tungsten carbide with the same measurements.
What the cost is and if its worth it.
Update:
Problem; they might shatter
By JK in 2016
Growing gems
Growing gems artificially.
A design with tungsten pressure pistons.
Tungsten is a metal with the highest melting point.
Documents with how to grow all kind of gems.
With information like;
The overal design of the athmospheric pressure device.
The weight and measurements of the seed gem.
The amount of athmosperic pressure, the amount of heat.
What to add.
And tests to see if you can grow a diamond with a sample from an artificial diamond.
.
Applications:
For drills.
For electronics.
Gems can be of importance to electronics.
For example diamond is highly conductive.
Simply for selling.
Mainly as cubes.
By Jeffrey Koelewijn
A design with tungsten pressure pistons.
Tungsten is a metal with the highest melting point.
Documents with how to grow all kind of gems.
With information like;
The overal design of the athmospheric pressure device.
The weight and measurements of the seed gem.
The amount of athmosperic pressure, the amount of heat.
What to add.
And tests to see if you can grow a diamond with a sample from an artificial diamond.
.
Applications:
For drills.
For electronics.
Gems can be of importance to electronics.
For example diamond is highly conductive.
Simply for selling.
Mainly as cubes.
By Jeffrey Koelewijn
Radio pulse turrets
Radio pulse turrets.
For shooting down vehicles, helicopters, air drones and more.
By JK in 2016
For shooting down vehicles, helicopters, air drones and more.
By JK in 2016
Radio pulse rifles for shooting down air drones
Radio pulse rifles for shooting down air drones.
By JK in 2016
By JK in 2016
vrijdag 25 november 2016
To improve list (Will be updated here and there)
To improve list.
Energy production;
Better photovoltaics.
Better wind and water energy.
Better and new designs and better dynamos, generators and turbines.
Transport;
Computers;
Electronics;
Better electronic components.
Space technology;
New and better propulsion.
Recycling;
New and more methods and processes.
Packaging;
Better packaging.
Other packaging.
Energy production;
Better photovoltaics.
Better wind and water energy.
Better and new designs and better dynamos, generators and turbines.
Transport;
Computers;
Electronics;
Better electronic components.
Space technology;
New and better propulsion.
Recycling;
New and more methods and processes.
Packaging;
Better packaging.
Other packaging.
woensdag 23 november 2016
Better windmills and water turbines
Better windmills and water turbines
Aerodynamic wind tunnel tests with scale models
With different designs from normal to axis wind mills
And with normall windmills; different rotor blades
Length, width, thickness. Different shapes and forms
Hydrodynamic water tunnel tests and other tests with water turbine scale models.
By Jeffrey Koelewijn in 2016
Aerodynamic wind tunnel tests with scale models
With different designs from normal to axis wind mills
And with normall windmills; different rotor blades
Length, width, thickness. Different shapes and forms
Hydrodynamic water tunnel tests and other tests with water turbine scale models.
By Jeffrey Koelewijn in 2016
Tests and experiments for the most optimal dynamos, turbines and generators
Tests and experiments for the most optimal dynamos, turbines and generators
Tests with:
The material of the wire
For example comparing copper and alluminium.
And also tests with other wires. For example: with better conductivity or with better diamagnetic properties or maybe even wire with paramagnetic properties.
And tests with and without an insulator.
Important: The same rpm, the same magnet, the same wire thickness, the same windings, the same coil but with another wire.
1 The thickness of the wire and the amount of windings.
2 The type of magnet.
The strength the size and also the form or shape.
3 The turning speed.
Formulas and thumb rules.
Other:
A pump typed dynamo, where the magnet goes up and down.
A combination of the magnet goes up and down and rotates.
Update:
The best and most effective gears system.
The best bearings.
The best grease.
Update:
Current coil or a 2 sided bar rotating in between a magnets north and south pole.
Tests with different metals. With different magnet sizes and strengths.
Update:
Different types of coils and efficiency tests
By Jeffrey Koelewijn
Tests with:
The material of the wire
For example comparing copper and alluminium.
And also tests with other wires. For example: with better conductivity or with better diamagnetic properties or maybe even wire with paramagnetic properties.
And tests with and without an insulator.
Important: The same rpm, the same magnet, the same wire thickness, the same windings, the same coil but with another wire.
1 The thickness of the wire and the amount of windings.
2 The type of magnet.
The strength the size and also the form or shape.
3 The turning speed.
Formulas and thumb rules.
Other:
A pump typed dynamo, where the magnet goes up and down.
A combination of the magnet goes up and down and rotates.
Update:
The best and most effective gears system.
The best bearings.
The best grease.
Update:
Current coil or a 2 sided bar rotating in between a magnets north and south pole.
Tests with different metals. With different magnet sizes and strengths.
Update:
Different types of coils and efficiency tests
By Jeffrey Koelewijn
Labels:
Better,
Dynamo,
Electricity,
Electricity generation,
Enhancing,
Experiments,
Ideas,
Improving,
Inventions,
Jeffrey Koelewijn,
Optimalising,
Science,
Technology,
Tests
Superconductor wire dynamo experiment
A dynamo made with superconductor wire
Design:
A casing, also for the wire
A magnet that can be spinned around in the casing
Wire that becomes a superconductor in contact with liquid nitrogen
Injection of liquid nitrogen into the casing with the wire
The casing should be partly closed
And a meter to see how much energy is produced
Safety is important with this experiment.
In the future a high temperature superconductor might be used.
By JK
Design:
A casing, also for the wire
A magnet that can be spinned around in the casing
Wire that becomes a superconductor in contact with liquid nitrogen
Injection of liquid nitrogen into the casing with the wire
The casing should be partly closed
And a meter to see how much energy is produced
Safety is important with this experiment.
In the future a high temperature superconductor might be used.
By JK
dinsdag 22 november 2016
Through wall imaging for the military
Through wall imaging for the military.
To see more precisely how many enemies there are.
To see where the enemies are taking cover.
And to see where to shoot.
For situations where there are hostages to get a good clear view and for better more precise planning.
By JK
To see more precisely how many enemies there are.
To see where the enemies are taking cover.
And to see where to shoot.
For situations where there are hostages to get a good clear view and for better more precise planning.
By JK
maandag 21 november 2016
A project to see how well carob trees can grow in the west
A project to see how well carob trees can grow in the west.
Carob has similarities to cacao.
And it can also be made into powder, chips and bars and be sold and eaten.
Fortunality carob trees grow in middle eastern climates and might grow very well in hot houses or in warmer western regions.
Extra:
When chocolate is mixed for hours it becomes smoother, maybe carob also becomes smoother when mixed for prolonged periods of time.
By Jeffrey Koelewijn
Carob has similarities to cacao.
And it can also be made into powder, chips and bars and be sold and eaten.
Fortunality carob trees grow in middle eastern climates and might grow very well in hot houses or in warmer western regions.
Extra:
When chocolate is mixed for hours it becomes smoother, maybe carob also becomes smoother when mixed for prolonged periods of time.
By Jeffrey Koelewijn
zondag 20 november 2016
What form of energy for example wind, water or solar energy and the efficiency
What form of energy for example wind, water or solar energy and the efficiency
1
What is the most efficient greatly depends on for example how much the sun shines or how much the wind blows.
Regional metereologic information can tell a lot about what's the best to use.
Or maybe there is a river nearby where a dam and or normal turbines can be placed.
2
How much it costs to place a windmill and how much does it produce.
And how many solar panels could be placed from this money and how much could they
produce.
And what are the durabilities.
Written by Jeffrey Koelewijn
1
What is the most efficient greatly depends on for example how much the sun shines or how much the wind blows.
Regional metereologic information can tell a lot about what's the best to use.
Or maybe there is a river nearby where a dam and or normal turbines can be placed.
2
How much it costs to place a windmill and how much does it produce.
And how many solar panels could be placed from this money and how much could they
produce.
And what are the durabilities.
Written by Jeffrey Koelewijn
A fast armoured vehicle, place for multiple soldiers with high efficient body armour and the right fire arms
A fast armoured vehicle , place for multiple soldiers with high efficient body armour and the right fire arms.
Armoured vehicle design:
The best bulletproof glass.
Bulletproof doors.
Special tires.
Holes to fire through, which can be opened and closed.
Machine gun on the top of the vehicle which can be operated with a ballistic shield.
Extra plated doors for cover.
And optional:
And an unfoldable plate for low cover,
The door can be put in a 90 or 180 degree angle, manually or with the click of a button.
A camera that shows the road for if the glass is broken.
Also possible: 2-4 km an hours driving and progression into enemy territory.
Vulnerabilities:
Tank fire
Bazooka's
IED
Can be countered with extra plating
Armoured vehicle design:
The best bulletproof glass.
Bulletproof doors.
Special tires.
Holes to fire through, which can be opened and closed.
Machine gun on the top of the vehicle which can be operated with a ballistic shield.
Extra plated doors for cover.
And optional:
And an unfoldable plate for low cover,
The door can be put in a 90 or 180 degree angle, manually or with the click of a button.
A camera that shows the road for if the glass is broken.
Also possible: 2-4 km an hours driving and progression into enemy territory.
Vulnerabilities:
Tank fire
Bazooka's
IED
Can be countered with extra plating
New chess game designs
Design one:
With 9 pawns
Two towers, two walkers, two knights, one elite assassin, one commander and the king.
The commander at the right of the king and an elite assassin, spy at the left side of the king.
The commander can move up to three squares to all directions and can go one step diagonal when facing an enemy.
The elite assassin can go in every direction over the whole field
Design two:
With 10 pawns
Two towers, two spearman, two walkers-assassins two knights a commander and the king.
Spearman can walk two squares.
The commander can move up to three squares to all directions and can go one step diagonal when facing an enemy.
Design three:
With 4 pawns two towers and 2 spearman in the front row
Two assassin-walkers, two bowman, two knights an elite assassin and the king.
Spearman can walk two squares.
Bowman can shoot up to three squares forward.
The commander can move up to three squares to all directions and can go one step diagonal when facing an enemy.
The elite assassin can go in every direction over the whole field.
With 9 pawns
Two towers, two walkers, two knights, one elite assassin, one commander and the king.
The commander at the right of the king and an elite assassin, spy at the left side of the king.
The commander can move up to three squares to all directions and can go one step diagonal when facing an enemy.
The elite assassin can go in every direction over the whole field
Design two:
With 10 pawns
Two towers, two spearman, two walkers-assassins two knights a commander and the king.
Spearman can walk two squares.
The commander can move up to three squares to all directions and can go one step diagonal when facing an enemy.
Design three:
With 4 pawns two towers and 2 spearman in the front row
Two assassin-walkers, two bowman, two knights an elite assassin and the king.
Spearman can walk two squares.
Bowman can shoot up to three squares forward.
The commander can move up to three squares to all directions and can go one step diagonal when facing an enemy.
The elite assassin can go in every direction over the whole field.
New card game decks designs
With 1-10 an aristocrat-jack a swordsman or spearman a king and an ace card.
With 1-10 a marksman-bowman a spearman or swordsman a king and an ace card.
A big playing card game deck with 1-10 a farmer, a marksman, a spearman or swordsman, an aristocrat-jack and the king and the ace card.
64 cards total.
And jokers can also be included with all three playing card game decks.
By Jeffrey Koelewijn
With 1-10 a marksman-bowman a spearman or swordsman a king and an ace card.
A big playing card game deck with 1-10 a farmer, a marksman, a spearman or swordsman, an aristocrat-jack and the king and the ace card.
64 cards total.
And jokers can also be included with all three playing card game decks.
By Jeffrey Koelewijn
zaterdag 19 november 2016
Experiments to see what's the best nm, colour wavelength for a laser power plants lasers
Experiments to see what's the best nm, colour wavelength for a laser power plants lasers.
By Jeffrey Koelewijn
By Jeffrey Koelewijn
A transpirant insulated green house with extra heating from sun or wind energy
A transpirant insulated green house with extra heating from sun or wind energy.
With solar panels or wind turbines powering electric boilers or heaters.
Especially for in fall and winter time. Together with lighting.
And its important that there is enough air moisture.
Other:
Extra heating from the sun is possible with long and or broad black basins with water, pipelines and a pump for pumping the heated water through the green house.
But this only works in warm climates or in around spring and summer time.
By JK in november 2016
With solar panels or wind turbines powering electric boilers or heaters.
Especially for in fall and winter time. Together with lighting.
And its important that there is enough air moisture.
Other:
Extra heating from the sun is possible with long and or broad black basins with water, pipelines and a pump for pumping the heated water through the green house.
But this only works in warm climates or in around spring and summer time.
By JK in november 2016
Transpirant insulation ideas for agriculture
Especially for agriculture; maximum sunlight and very good insulation.
Ideas:
One 1:
Stretched, semi covered or a thin layer between two air tight layers of glass
One 2:
Maybe a combination of cellulose and transpirant material
Two: semi transpirant, dimmed light.
More transpirant material less cellulose
Three: almost full to fully transpirant.
Only transpirant material
By JK in november 2016
Ideas:
One 1:
Stretched, semi covered or a thin layer between two air tight layers of glass
One 2:
Maybe a combination of cellulose and transpirant material
Two: semi transpirant, dimmed light.
More transpirant material less cellulose
Three: almost full to fully transpirant.
Only transpirant material
By JK in november 2016
vrijdag 18 november 2016
An environmental safe battery
An environmental safe battery.
For example you can generate an electric current with salt water (an electrolyte) and copper and zinc or alluminium, also called a salt water battery.
But this battery isn't strong enough.
So a good environmental safe battery would need a much more powerfull environmental safe electrolyte.
Update:
A specialised voltaic pile with a special electrolyte might give progression.
Maybe a glowing fluid, liquid.
Non toxic fluorecent. And maybe with an added electrolyte which in combination is not a problem.
Extra update: Quinine(present in tonic water) an electrolyte and sunlight or concentrated UV light from a UV light bar.
Update 2:
An electrolyte is a liquid or gel which contains ions and can be decomposed by electrolysis
A list of electrolytes:
Sodium, calcium, potassium, chlorine, phosphate, magnesium and bicarbonate.
Extra update: A list of metals that can together generate electricity with an electrolyte and tests how good they work.
Update 3:
Tests and measurements with the amount of water and the amounts of electrolyte
Combining two, three or more electrolytes.
Step 2: a reloadable environmental safe battery.
Extra update, special update:
Sea water electrolyte power plant.
First: Tests to see if a bigger container with salt and water and bigger plates, pipes, plates or poles of for example copper and zinc do generate more current.
Tests to see what the best metals are to use.
Extra: The sea water also constantly moves, this might have a possitive effect.
By JK in 2016
For example you can generate an electric current with salt water (an electrolyte) and copper and zinc or alluminium, also called a salt water battery.
But this battery isn't strong enough.
So a good environmental safe battery would need a much more powerfull environmental safe electrolyte.
Update:
A specialised voltaic pile with a special electrolyte might give progression.
Maybe a glowing fluid, liquid.
Non toxic fluorecent. And maybe with an added electrolyte which in combination is not a problem.
Extra update: Quinine(present in tonic water) an electrolyte and sunlight or concentrated UV light from a UV light bar.
Update 2:
An electrolyte is a liquid or gel which contains ions and can be decomposed by electrolysis
A list of electrolytes:
Sodium, calcium, potassium, chlorine, phosphate, magnesium and bicarbonate.
Extra update: A list of metals that can together generate electricity with an electrolyte and tests how good they work.
Update 3:
Tests and measurements with the amount of water and the amounts of electrolyte
Combining two, three or more electrolytes.
Step 2: a reloadable environmental safe battery.
Extra update, special update:
Sea water electrolyte power plant.
First: Tests to see if a bigger container with salt and water and bigger plates, pipes, plates or poles of for example copper and zinc do generate more current.
Tests to see what the best metals are to use.
Extra: The sea water also constantly moves, this might have a possitive effect.
By JK in 2016
donderdag 17 november 2016
Near frictionles or frictionles dynamo
A frictionles dynamo where the magnet is levitating and being hold in place
and around the magnet a coil to produce energy when the magnet rotates.
HTS high temperature superconductors could make this technology possible.
By Jeffrey Koelewijn in 2016
Update: Vacuum ?
and around the magnet a coil to produce energy when the magnet rotates.
HTS high temperature superconductors could make this technology possible.
By Jeffrey Koelewijn in 2016
Update: Vacuum ?
Agriculture open building system
A high building with as much open space as possible, with maximum sunlight.
Somewhat dimmed light where there is just enough sunlight.
And places where the sunlight doesn't reach enough, should be extra artificially lighted.
By JK
Somewhat dimmed light where there is just enough sunlight.
And places where the sunlight doesn't reach enough, should be extra artificially lighted.
By JK
a weak to moderately radioactive element alloy (idea)
a weak to moderately radioactive element alloy (idea)
The idea is to make an alloy with two weak or to two moderately radioactive metals.
Offcourse this experiment should take place in a specialised lab.
This or these alloys might be of importance to nuclear energy production.
By JK in 2015
The idea is to make an alloy with two weak or to two moderately radioactive metals.
Offcourse this experiment should take place in a specialised lab.
This or these alloys might be of importance to nuclear energy production.
By JK in 2015
Experiment to see what happens if you suddenly put together around the coldest liquid gas with around the hottest possible matter
Experiment to see what happens if you suddenly put together around the coldest liquid gas with around the hottest possible matter
Safety:
This experiment should take place in a specialised lab.
The idea is to suddenly combine for example -273 degrees celcius or colder liquid gas with molten tungsten with a temperature of around 3410 degrees celcius.
Using around 3550 degrees molten carbon is also possible.
Update: Probably leiden frost effect. But maybe more.
Update:
Maybe pouring the molten or even boiling tungsten in to the liquid helium.
Update, extra:
Pouring boiling carbon of 4827 degrees celcius in to liquid helium of -269
By Jeffrey Koelewijn in december 2015
Safety:
This experiment should take place in a specialised lab.
The idea is to suddenly combine for example -273 degrees celcius or colder liquid gas with molten tungsten with a temperature of around 3410 degrees celcius.
Using around 3550 degrees molten carbon is also possible.
Update: Probably leiden frost effect. But maybe more.
Update:
-269 liquid helium and boiling tungsten of 5660 degrees celcius
Maybe pouring the molten or even boiling tungsten in to the liquid helium.
Update, extra:
Pouring boiling carbon of 4827 degrees celcius in to liquid helium of -269
By Jeffrey Koelewijn in december 2015
Important with bulletproof technology 2
Important with bulletproof technology 2
How it stops the bullet:
For example by hardness or by catching the bullet.
Ceramics and hard carbon steel plates stop the bullet by hardness.
While kevlar textile catches the bullet with high tear resistant synthetic fibers.
Stopping the bullet with both hardness and strong tear resistant catching is also possible, for example with bulletproof glass: the glass is hard and the polycarbonate is strong and flexible and catches the bullet.
Gells stop the bullet because the surface area is hard when hit or shot with a certain amount of power and speed. and the gells also have a stopping power along the whole way.
By JK in november 2016
How it stops the bullet:
For example by hardness or by catching the bullet.
Ceramics and hard carbon steel plates stop the bullet by hardness.
While kevlar textile catches the bullet with high tear resistant synthetic fibers.
Stopping the bullet with both hardness and strong tear resistant catching is also possible, for example with bulletproof glass: the glass is hard and the polycarbonate is strong and flexible and catches the bullet.
Gells stop the bullet because the surface area is hard when hit or shot with a certain amount of power and speed. and the gells also have a stopping power along the whole way.
By JK in november 2016
A submachine gun, an ammunition filled backpack and an ammo guider
A submachine gun, an ammunition filled backpack and an ammo guider
Design:
A submachine gun.
A backpack full of ammunition.
And an ammo guider from the backpack to guide the ammunition to the firearm.
Important:
Through testing and a manual.
By JK
Design:
A submachine gun.
A backpack full of ammunition.
And an ammo guider from the backpack to guide the ammunition to the firearm.
Important:
Through testing and a manual.
By JK
dinsdag 15 november 2016
Stainless steel knife or dagger with extra freeze tempering (idea)
Stainless steel knife or dagger with extra freeze tempering.
By JK in november 2016
By JK in november 2016
Important with bulletproof technology
1 What it stops
2 The cost
3 The weight
Written by Jeffrey Koelewijn in 2016
2 The cost
3 The weight
Written by Jeffrey Koelewijn in 2016
Bulletproof technology ideas - Special metallic plates with holes or metallic foam
Special metallic plates with certain sized holes or Random sized holes.
Important: the holes should not reach the other side of the place.
Or a special type of metallic foam.
These plates are lighter then solid plates
And
Possibly: they change the angle and trajectory of the bullet.
Scratch the bullet.
And the air pockets also have an effect.
Also important they can deal better with heat
Other things to improve the bulletproof capabilities might be:
Filling the holes with kevlar.
Filling the holes with a special type of foam.
Dipping the whole design in a special type of rubber for a rubber coating.
By JK in november 2016
Important: the holes should not reach the other side of the place.
Or a special type of metallic foam.
These plates are lighter then solid plates
And
Possibly: they change the angle and trajectory of the bullet.
Scratch the bullet.
And the air pockets also have an effect.
Also important they can deal better with heat
Other things to improve the bulletproof capabilities might be:
Filling the holes with kevlar.
Filling the holes with a special type of foam.
Dipping the whole design in a special type of rubber for a rubber coating.
By JK in november 2016
maandag 14 november 2016
A couple of magnetic experiments
Some interesting magnetic experiments.
Warning: Some of the following experiments are dangerous and should be done in the right environment and with the right safety measures
1
Firing a neodynium or a strong electromagnet through an aluminium or copper pipe.
Copper and aluminium have good diamagnetic proporties
Important :
The pipe should be fixed on to something so it won't move.
And safety is required.
Firing two strong electromagnets at each other.
With one magnets north facing the other magnets north, set at repelling
Or with attracting, north facing towards south for example.
Two: Firing two magnets at each other inside a diamagnetic tube.
Set at repelling each other or attracting.
Firing a neodynium or electromagnetic at a suoerconductor type I or II.
2
A test to see hoe much current is created when a magnet is fired through a long non diamagnetic tube or pipe with a copper coil around it.
First scale models then bigger models if the outcomes are positieve.
Non dangerous:
3
Levitating an electromagnetic above a superconductor.
By Jeffrey Koelewijn in 2015 and 2016
Warning: Some of the following experiments are dangerous and should be done in the right environment and with the right safety measures
1
Firing a neodynium or a strong electromagnet through an aluminium or copper pipe.
Copper and aluminium have good diamagnetic proporties
Important :
The pipe should be fixed on to something so it won't move.
And safety is required.
Firing two strong electromagnets at each other.
With one magnets north facing the other magnets north, set at repelling
Or with attracting, north facing towards south for example.
Two: Firing two magnets at each other inside a diamagnetic tube.
Set at repelling each other or attracting.
Firing a neodynium or electromagnetic at a suoerconductor type I or II.
2
A test to see hoe much current is created when a magnet is fired through a long non diamagnetic tube or pipe with a copper coil around it.
First scale models then bigger models if the outcomes are positieve.
Non dangerous:
3
Levitating an electromagnetic above a superconductor.
By Jeffrey Koelewijn in 2015 and 2016
An electromagnetic EM tractor beam magnet
A tractor beam\inverter magnet made with electromagnets
Important:
Safety required
By JK in 2015
Important:
Safety required
By JK in 2015
An air drones base for military purposes
Build on a ship for example or at home base.
With stand on type wireless reload on the spot.
Or simply with cables.
By JK in november 2016
With stand on type wireless reload on the spot.
Or simply with cables.
By JK in november 2016
Military air drones armed with radio pulse guns
For shooting down vehicles tanks and helikopters.
Or for direct EWCM reasons (destroying equipment)
By Jeffrey Koelewijn in november 2016
Or for direct EWCM reasons (destroying equipment)
By Jeffrey Koelewijn in november 2016
Military air drones with solar cells
For self reload and longer flight times with the best photovoltaics.
Two sledgehammer designs
Two sledgehammer designs.
Design one:
A sledgehammer with three or four knots by the striking part of the hammer.
With tests to see if it tears down more concrete rapidly.
Design two:
A sledgehammer with a slightly flexible but durable handle.
By Jeffrey Koelewijn in 2016
Design one:
A sledgehammer with three or four knots by the striking part of the hammer.
With tests to see if it tears down more concrete rapidly.
Design two:
A sledgehammer with a slightly flexible but durable handle.
By Jeffrey Koelewijn in 2016
A one person tent with a pipe tube and a screw cap
A one person tent with a pipe tube and a screw cap.
A durable waterproof one personeel tent with a pipe tube and a screw cap.
Important:
Durable
Waterproof
Easy to set up and easy to store and transport
The pipe tube ensures more durability.
By Jeffrey Koelewijn in november 2016
A durable waterproof one personeel tent with a pipe tube and a screw cap.
Important:
Durable
Waterproof
Easy to set up and easy to store and transport
The pipe tube ensures more durability.
By Jeffrey Koelewijn in november 2016
A bulletproof suit and exosuit combination
A bulletproof suit and exosuit combination.
They should be made for each other and both be durable and comfortable.
Important for long wearing and a lot of movement:
The suit also needs a way to deal with sweat, guide it away.
They should be made for each other and both be durable and comfortable.
Important for long wearing and a lot of movement:
The suit also needs a way to deal with sweat, guide it away.
Bulletproof suits
Bulletproof suits.
Made with bulletproof material, easy to put on, good fit and durable.
A couple of types of bulletproof suits, by armour grade:
A light armour suit for lead handgun bullets.
A medium to heavy armour suit for normal lead rifle bullets.
A heavy armour suit for stopping armour piercing bullets.
Made with bulletproof material, easy to put on, good fit and durable.
A couple of types of bulletproof suits, by armour grade:
A light armour suit for lead handgun bullets.
A medium to heavy armour suit for normal lead rifle bullets.
A heavy armour suit for stopping armour piercing bullets.
A bulletproof suit with extra protection at vital areas
A bulletproof suit with extra protection at vital areas.
An easy and fast to put on and off bulletproof suit with extra protection at vital areas.
Such as the forehead and the heart.
The suit should be comfortable to wear and should also be durable.
By Jeffrey Koelewijn in 2016
An easy and fast to put on and off bulletproof suit with extra protection at vital areas.
Such as the forehead and the heart.
The suit should be comfortable to wear and should also be durable.
By Jeffrey Koelewijn in 2016
zondag 13 november 2016
Bulletproof mask with bulletproof glass eye protection
Bulletproof mask with bulletproof glass eye protection.
Design:
A bulletproof glass mold with around half the design of the mask.
Layers of glass and polycarbonate.
Extra strong ultra thin glass might also be possible.
Then the ceramics or solid kevlar around the bulletproof glass.
By Jeffrey Koelewijn in november 2016
Design:
A bulletproof glass mold with around half the design of the mask.
Layers of glass and polycarbonate.
Extra strong ultra thin glass might also be possible.
Then the ceramics or solid kevlar around the bulletproof glass.
By Jeffrey Koelewijn in november 2016
Bulletproof eyeshield and bulletproof mask with army helmet
Bulletproof eyeshield and bulletproof mask with army helmet.
A bulletproof eyeshield with an army helmet
Extra Strong and specially coated.
Comfortable and good to wear.
A bulletproof mask with an army helmet.
Extra Strong.
Possible made from a ceramic or solid kevlar.
Comfortable to wear.
Important: it should not impair vision
Looking from left to right should not be a problem
Design: Loose from the helmet or fixed to the helmet.
A full helmet with one wide looking part for both eyes,
this can be made from bulletproof glass fixed in the middle of the mask.
By Jeffrey Koelewijn in november 2016
A bulletproof eyeshield with an army helmet
Extra Strong and specially coated.
Comfortable and good to wear.
A bulletproof mask with an army helmet.
Extra Strong.
Possible made from a ceramic or solid kevlar.
Comfortable to wear.
Important: it should not impair vision
Looking from left to right should not be a problem
Design: Loose from the helmet or fixed to the helmet.
A full helmet with one wide looking part for both eyes,
this can be made from bulletproof glass fixed in the middle of the mask.
By Jeffrey Koelewijn in november 2016
Bulletproof balaclava design
A bulletproof balaclava with extra padding by the forehead and maybe more places
It should be comfortabele to wear.
It should fit very well.
It shouldn't slide or adjust while running and sprinting.
Looking from left to right should not be a problem.
And it should also be durable.
By Jeffrey Koelewijn
It should be comfortabele to wear.
It should fit very well.
It shouldn't slide or adjust while running and sprinting.
Looking from left to right should not be a problem.
And it should also be durable.
By Jeffrey Koelewijn
A ferrite inverter, tractor beam magnet design
A ferrite inverter, tractor beam magnet design.
An inverter magnet made with ferrite magnets.
It would be very interesting if this would work.
By Jeffrey Koelewijn
An inverter magnet made with ferrite magnets.
It would be very interesting if this would work.
By Jeffrey Koelewijn
Magnetic experiment with one neodynium magnet and two superconductor discs
Magnetic experiment with one neodynium magnet and two superconductor discs.
Two superconductors
Liquid nitrogen
A neodynium magnet
The experiment is to put the neodynium magnet in between the two superconductor discs, that are a certain amount apart and see what happens.
Safety required
Two flat bars might also be interesting
By Jeffrey Koelewijn
Two superconductors
Liquid nitrogen
A neodynium magnet
The experiment is to put the neodynium magnet in between the two superconductor discs, that are a certain amount apart and see what happens.
Safety required
Two flat bars might also be interesting
By Jeffrey Koelewijn
Two semi levitating ferrite magnets
Two semi levitating ferrite magnets
I stumbled upon this by accident when i did a magnetic experiment with magnets and a container.
I made two design with magnets glued one in the container and the other one on the screw lit. When I brought the two design together I heard a click and saw two semi levitating ferrite magnets.
Needed:
Two round ferrite magnets with a diameter of around 3.5 - 4 cm and 2 to 3 cm in length
I used 2 speaker magnets with a cover hole in the middle
Two neodynium ring magnets of about 1cm in diameter
Two round iron balls around 1 cm in diameter
Two ferrite magnets with a small hole in the middle around 1.5 cm diameter
A container with a screw lid or a double bar platform with two platforms that can be brought together
First the big ferrite magnets on top of this the neodynium ring magnets on the neodynium ring magnets the iron ball slightly in the ring and on the iron ball the ferrite magnets with a small hole.
Both design should look the Same.
Important:
The Right magnets and iron ball
The Right build up
Also important is that the Right sides of the magnets face up or Down
That the two design have the right distance from each other
By Jeffrey Koelewijn
I made it in 2013 but it went lost.
Update 22-08-2017
Three new and better sketches
First it looks like this, before the two magnets shift into another position
Update 2017 before 07-2017
3 sketches:
I will make 1 or 2 better and more precise pictures later
I stumbled upon this by accident when i did a magnetic experiment with magnets and a container.
I made two design with magnets glued one in the container and the other one on the screw lit. When I brought the two design together I heard a click and saw two semi levitating ferrite magnets.
Needed:
Two round ferrite magnets with a diameter of around 3.5 - 4 cm and 2 to 3 cm in length
I used 2 speaker magnets with a cover hole in the middle
Two neodynium ring magnets of about 1cm in diameter
Two round iron balls around 1 cm in diameter
Two ferrite magnets with a small hole in the middle around 1.5 cm diameter
A container with a screw lid or a double bar platform with two platforms that can be brought together
First the big ferrite magnets on top of this the neodynium ring magnets on the neodynium ring magnets the iron ball slightly in the ring and on the iron ball the ferrite magnets with a small hole.
Both design should look the Same.
Important:
The Right magnets and iron ball
The Right build up
Also important is that the Right sides of the magnets face up or Down
That the two design have the right distance from each other
By Jeffrey Koelewijn
I made it in 2013 but it went lost.
Update 22-08-2017
Three new and better sketches
Update 2017 before 07-2017
3 sketches:
A new card deck design
A new card deck design
With the cards 1 to 10, jack(knave), knight, king and ace
By Jeffrey Koelewijn
With the cards 1 to 10, jack(knave), knight, king and ace
By Jeffrey Koelewijn
A new chess game with new chess pieces
A new chess game with new chess pieces
With pawns, towers, knights, assassin scouts/walkers a paladin and a king.
By Jeffrey Koelewijn
With pawns, towers, knights, assassin scouts/walkers a paladin and a king.
By Jeffrey Koelewijn
Space exploration rovers that reload themselves on background radiation
Space exploration rovers that reload themselves on background radiation.
Mainly there is a lot of background radiation, so if this could be harnessed it would be great.
Long missions would be possible with this technology.
Mainly there is a lot of background radiation, so if this could be harnessed it would be great.
Long missions would be possible with this technology.
Labels:
Exploration,
Idea,
Ideas,
Inventions,
Jef,
Jef Koelewijn,
Jeffrey Koelewijn,
Reload on background radiation,
Reloading,
Science,
Space,
Space exploration,
Technology
Space exploration rovers with solar panels
Space exploration rovers with solar panels.
Rovers that reload themselves with solar panels.
The best solar panels should be used.
And a cleaning brush to remove dust for example might be important.
By JK on 11-13-2016
Update: They already exist.
Rovers that reload themselves with solar panels.
The best solar panels should be used.
And a cleaning brush to remove dust for example might be important.
By JK on 11-13-2016
Update: They already exist.
An aurora research centre or two aurora research centres
An aurora research centre or two aurora research centres
For studying the auroras at the north and or south pole.
For studying the auroras at the north and or south pole.
Tests to see how snow and ice react to laser beams
Tests to see how snow and ice react to laser beams
From laser pointers to burning lasers to industrial cutting lasers
From uv to the far infrared spectrum
Safety is very important
Also due to that the laser light can scatter around
These tests might also be important to calculate what happens when shooting Down a comet with a giant laser.
By Jeffrey Koelewijn
From laser pointers to burning lasers to industrial cutting lasers
From uv to the far infrared spectrum
Safety is very important
Also due to that the laser light can scatter around
These tests might also be important to calculate what happens when shooting Down a comet with a giant laser.
By Jeffrey Koelewijn
Laser artillery cannon
A laser artillery cannon
For Military purposes
And it could also be used for shooting down comets and asteroids.
Build up:
The best and most powerfull laser diode and an enourmess amount of power.
Important:
The type of laser
Pump laser for example.
Or a gas laser.
The amount of power Watts, kW
The desired spectrum nm, wavelength (from uv to far infrared)
By Jeffrey Koelewijn
november 2016
For Military purposes
And it could also be used for shooting down comets and asteroids.
Build up:
The best and most powerfull laser diode and an enourmess amount of power.
Important:
The type of laser
Pump laser for example.
Or a gas laser.
The amount of power Watts, kW
The desired spectrum nm, wavelength (from uv to far infrared)
By Jeffrey Koelewijn
november 2016
zaterdag 12 november 2016
Full body armour and military exosuit
Full body armour and military exosuit
The exosuit enhance power and speed, moves along.
So running at near full Speed with 50 to 60 kg of armour is possible.
And running for miles takes minimal effort.
1
Full kevlar armour and one bullet proof ceramic plate
2
Full bulletproof armour with plates pads and more
Extra:
Pre training with weights.
Dumbells and back weight walks
Design extra:
A fast wat to put off the exosuit.
3
An armoured exosuit you van step in to
Designed by Jeffrey Koelewijn in november 2016
The exosuit enhance power and speed, moves along.
So running at near full Speed with 50 to 60 kg of armour is possible.
And running for miles takes minimal effort.
1
Full kevlar armour and one bullet proof ceramic plate
2
Full bulletproof armour with plates pads and more
Extra:
Pre training with weights.
Dumbells and back weight walks
Design extra:
A fast wat to put off the exosuit.
3
An armoured exosuit you van step in to
Designed by Jeffrey Koelewijn in november 2016
Paint change camo for military vehicles tanks and helicopters
Paint change camo for military vehicles tanks and helicopters
1 colour
Green, desert, White and black for example
With 3 or 4 colours
For example light green camo to light desert camo, dark green camo to dark desert camo,
snow camo and so on
Designed by Jeffrey Koelewijn in november 2016
Update: The camouflage paint should change with the push of a buton.
-They already use this technology on certain very expensive cars.
1 colour
Green, desert, White and black for example
With 3 or 4 colours
For example light green camo to light desert camo, dark green camo to dark desert camo,
snow camo and so on
Designed by Jeffrey Koelewijn in november 2016
Update: The camouflage paint should change with the push of a buton.
-They already use this technology on certain very expensive cars.
Bulletproof technology ideas - steel plates and plastics or kevlar
Bulletproof technology ideas - steel plates and plastics or kevlar
1
Steel plates from soft to hard with plastics, polycarbonate for example
A design: 4 or 5 layers of steel and 3 or four layers of polycarbonate
With the build up steel, polycarbonate, steel, polycarbonate, steel and so on
1 Two other designs with less polycarbonate.
More suitable for bulletproof vest plates.
A steel plate with on both sides hard steel and in the middle 2 layers of plastics and one thin layer of medium hard steel.
Two hard steel plates and in the middle a layer of polycarbonate.
They should be pressed and welded into one rigid plate for a bulletproof vest
Through testing would be needed for these.
Update: Only extra hard steel plates and layers of polycarbonate
They could also be used for vehicles.
Certain steel plates and polycarbonate would be very interestin
2
Steel plates from soft to hard with kevlar.
By Jeffrey Koelewijn in 2016
1
Steel plates from soft to hard with plastics, polycarbonate for example
A design: 4 or 5 layers of steel and 3 or four layers of polycarbonate
With the build up steel, polycarbonate, steel, polycarbonate, steel and so on
1 Two other designs with less polycarbonate.
More suitable for bulletproof vest plates.
A steel plate with on both sides hard steel and in the middle 2 layers of plastics and one thin layer of medium hard steel.
Two hard steel plates and in the middle a layer of polycarbonate.
They should be pressed and welded into one rigid plate for a bulletproof vest
Through testing would be needed for these.
Update: Only extra hard steel plates and layers of polycarbonate
They could also be used for vehicles.
Certain steel plates and polycarbonate would be very interestin
2
Steel plates from soft to hard with kevlar.
By Jeffrey Koelewijn in 2016
Bulletproof technology - ballistic glass ideas
Bulletproof technologie ideas - ballistic glass ideas
1
Extra strong ultra thin glass layers and layers of polycarbonate.
2
Extra strong ultra thin glass layers and glass layers.
3
A combination of extra strong ultra thin glass layers, polycarbonaat layers and glass layers.
By Jeffrey Koelewijn in 2016
1
Extra strong ultra thin glass layers and layers of polycarbonate.
2
Extra strong ultra thin glass layers and glass layers.
3
A combination of extra strong ultra thin glass layers, polycarbonaat layers and glass layers.
By Jeffrey Koelewijn in 2016
woensdag 9 november 2016
Bulletproof technology ideas - A bulletproof glas plate for in bulletproof vests
Bulletproof technology ideas - A bulletproof glass plate for in bulletproof vests
A bulletproof glas plate for in bulletproof vests.
With a smooth special rubber coating.
The plate should be nearly unbreakable and should be very resistant to falling and rough handling.
By Jeffrey Koelewijn. In 2016
Update: The weight might be a problem. But I've seen bulletproof glass stop multiple AK 47 bullets.
A bulletproof glas plate for in bulletproof vests.
With a smooth special rubber coating.
The plate should be nearly unbreakable and should be very resistant to falling and rough handling.
By Jeffrey Koelewijn. In 2016
Update: The weight might be a problem. But I've seen bulletproof glass stop multiple AK 47 bullets.
Labels:
Army,
Ballistic glass,
Bullet resistant,
Bullet resistant glass,
Bulletproof,
Bulletproof glass,
Glass,
Idea,
Ideas,
Jef,
Jef Koelewijn,
Jeffrey Koelewijn,
Military,
Protection
Bulletproof technology ideas - carbon nanotube woven fibers and carbon nanotube plates
Bulletproof technology ideas - carbon nanotube woven fibers and carbon nanotube plates
A bulletproof vest made out of woven carbon nanotube fibers
A carbon nanotube plate
Idea from Jeffrey Koelewijn.
A bulletproof vest made out of woven carbon nanotube fibers
A carbon nanotube plate
Idea from Jeffrey Koelewijn.
maandag 7 november 2016
Bulletproof technology ideas - special steel plates
Bulletproof technology ideas - special steel plates
Tests to see what is the best steel to stop certain bullets
Medium hard steel
Hard steel
Extra hard steel
With medium hard steel a hole might be shot/punched in but there might be no breaking and or shattering. On the other hand hard and extra hard steel are harder but have more brittleness.
Steel plate layers
For example extra hard then hard then medium hard then hard again
The extra hard layer on the strike part of the plate
Update:
Two times extra hard, one hard layer and one extra hard layer.
Extra hard steel plate:
Heated to around 1075 degrees celcius and then put in a special type of oil or water
Heated to 175 - 350 degrees celcius for around two hours (baking)
Better rubber around the plate. flight deck ship rubber like material.
Other existing tempering processes:
Freeze tempering, cryogenic hardening. cooling the steel ballistic plate to around -185 degrees celcius. Mainly with liquid nitrogen.
Induction tempering.
Update: High carbon steel
Layered steel
With the best and effective tempering methods
By Jeffrey Koelewijn
Tests to see what is the best steel to stop certain bullets
Medium hard steel
Hard steel
Extra hard steel
With medium hard steel a hole might be shot/punched in but there might be no breaking and or shattering. On the other hand hard and extra hard steel are harder but have more brittleness.
Steel plate layers
For example extra hard then hard then medium hard then hard again
The extra hard layer on the strike part of the plate
Update:
Two times extra hard, one hard layer and one extra hard layer.
Extra hard steel plate:
Heated to around 1075 degrees celcius and then put in a special type of oil or water
Heated to 175 - 350 degrees celcius for around two hours (baking)
Better rubber around the plate. flight deck ship rubber like material.
Other existing tempering processes:
Freeze tempering, cryogenic hardening. cooling the steel ballistic plate to around -185 degrees celcius. Mainly with liquid nitrogen.
Induction tempering.
Update: High carbon steel
Layered steel
With the best and effective tempering methods
By Jeffrey Koelewijn
dinsdag 1 november 2016
levitating inverter magnet experiment design
Experiment to achieve a levitating inverter magnet, tractor beam magnet
With superconductors
With liquid nitrogen and material that becomes a super conductor in contact with liquid nitrogen
(Safety required)
With extra light material for the ring and Bismuth (Diamagnetic)
With electromagnetic fields
With an electromagnetic levitation device
With multiple electromagnetic levitation devices
With a magnetic levitation platform
Should be done carefully so it doesn't damage
It would be very nice if the outer magnet could spin around the ring with magnets Without any friction.
Experiment design by Jeffrey Koelewijn in 2015
With superconductors
With liquid nitrogen and material that becomes a super conductor in contact with liquid nitrogen
(Safety required)
With extra light material for the ring and Bismuth (Diamagnetic)
With electromagnetic fields
With an electromagnetic levitation device
With multiple electromagnetic levitation devices
With a magnetic levitation platform
Should be done carefully so it doesn't damage
It would be very nice if the outer magnet could spin around the ring with magnets Without any friction.
Experiment design by Jeffrey Koelewijn in 2015
Bulletproof technology ideas
Bulletproof technology ideas
Steel plate
Heated to around 1050 - 1090 degrees celcius then put in a special type of oil or water
Cold treated to minus ... degrees celcius
Heated to 175 - 350 degrees celcius for around two hours
Better rubber around the plate. flight deck ship rubber like material.
Layered steel
With the best and effective tempering methods
Woven carbonanotube fibers.
Extra strengthened ultra thin glass layers and layers of plastic sheetings or other better material.
Extra information, used materials and methods:
-Polycarbonate (A thermoplastic)
Other not plastic sheeting used in bulletproof glass:
-Aluminum oxynitride
-Certain ceramics
Other: 2 A used method:
Air chamber glass
My idea: Combined with other above methods and materials.
By Jeffrey Koelewijn in 2016
Steel plate
Heated to around 1050 - 1090 degrees celcius then put in a special type of oil or water
Cold treated to minus ... degrees celcius
Heated to 175 - 350 degrees celcius for around two hours
Better rubber around the plate. flight deck ship rubber like material.
Layered steel
With the best and effective tempering methods
Woven carbonanotube fibers.
Extra strengthened ultra thin glass layers and layers of plastic sheetings or other better material.
Extra information, used materials and methods:
-Polycarbonate (A thermoplastic)
Other not plastic sheeting used in bulletproof glass:
-Aluminum oxynitride
-Certain ceramics
Other: 2 A used method:
Air chamber glass
My idea: Combined with other above methods and materials.
By Jeffrey Koelewijn in 2016
Radio pulse sniper
Radio pulse sniper
For shooting down vehicles, tanks and helicopters
By Jeffrey Koelewijn (In 2016)
Update 24-11-2018
The radio pulse should have a certain radius and very high reach.
Update 27-09-2019
It for example disables vehicles, tanks and helicopters.
And it should have a not too big radius and very high reach.
For shooting down vehicles, tanks and helicopters
By Jeffrey Koelewijn (In 2016)
Update 24-11-2018
The radio pulse should have a certain radius and very high reach.
Update 27-09-2019
It for example disables vehicles, tanks and helicopters.
And it should have a not too big radius and very high reach.
Energy, power supply back pack
Energy, power supply back pack
For militairy purposes.
For handheld:
-Electronic weapons
Laser weapons
Radio pulse weapons
-DEW (Direct energy weapons) for example
By Jeffrey Koelewijn (in 2015)
For militairy purposes.
For handheld:
-Electronic weapons
Laser weapons
Radio pulse weapons
-DEW (Direct energy weapons) for example
By Jeffrey Koelewijn (in 2015)
Abonneren op:
Reacties (Atom)






